Commercial BoatsWork BoatsavailableLochin
The Lochin 40 has seen many varients many due to the versatile and proven charateristics of this semi displacement hull form. This potting vessel was the result of many years operating a commercial enterprise in some of the most inhospitable of conditions which started with a Lochin 33 and then a 38. Probably one of the best maintained examples you will find currently owned by a highly respected and successful fisherman who knows exactly what is needed to do the job. Licence NOT included. This vessel can take the ground with bilge keels fitted. Previously MCA Coded (Cat.3) Licence not included.
Furuno Radar - (2018)
Furuno EP3500 + Kelvin 110 Plotters
Furuno Dual Frequency Sounder
Sailor VHF Radio (DSC)
24 Volt system
Battery Installation: Two banks of two 12v (140 A/hr)
VOLVO D6 rated at 370hp each driving through 2.1 ratio ZF/MPM220A gearboxes on a direct shaft line via 4 blade NAB propellers. Rope cutters are fitted.
Performance: 23-24 knots Max. 17-18 knots Cruise
Consumption: appprox. 60 Litres/hr at Cruise
Fuel Capacity: 900 Litres
4 Man Life Raft (Valaise) - needs a service
FOPEPEAK with 2 berths and storage with anchor locker forward. WHEELHOUSE offset to port with helm console to starboard housing all engine instrumentation and electronic heads in close proximity adjacent to the helm chair. Hydraulic steering and single lever engine controls. Opening window to hauling area (S). Port side bench seat. Aluminium door to COCKPIT - engine hatches are flush to the deck and provide easy access for general maintenance, etc.. A deck hatch is provided for access to the tiller flat area but otherwise there is a clear working area through to the transom with scuppering via stainless steel ports in the transom. Substantial brazilian mahogany gunwhale cappings and GRP hull chafer panels are fitted covering the vulnerable areas of the hull with cockpit rails to port. The protected hauling area has a 1 Ton slave hauler with outboard gantry and pots 'shoot' off the starboard quarter. A stern mast and steady sail are available. Substantial deck fittings as appropriate for a working vessel.
1 Ton Slave Hauler + Gantry
Deckwash / Bilge Pump from port engine
Launching Trailer (available)
Trim Tabs (fixed)
Mizzen Steady Sail...Read full description