£ 120,032
Mc Conaghy - MC31
Ancasta Raceboats
Profile page
ad ref. BCU8488987
£ 120,032
listed price: $ 155,000
Vat Excluded / Not Paid

Mc Conaghy - MC31

Sailing BoatsMc ConaghyMC31China

Following on from the outstanding success of the MC38 One Design, McConaghy Boats brings you the MC31 a High Performance, Grand Prix racer that is true to it’s design brief: fun, fast, and rewarding to sail . Outstanding hull form stability, with a deep draft carbon fin and a heavy bulb combined to provide a low centre of gravity and stability that is unmatched in this size range. The MC38 has demonstrated that with careful design of a powerful hull form and a powerful sail plan, high performance sailing can be exciting in all wind ranges without being taxing on crew and skippers. The MC31 will do the same, it will sail like a much larger yacht upwind in a breeze and light up down wind like a skiff, but be stable enough to stay up right and safe.


2 x setee seats with lifting lids in saloon area
2 x setee seat cushions - black with red piping
Light weight "porta potti" head
Removable ice box cooler under companionway step.

15 hp Yanmar diesel engine with Sail Drive
2 Blade Folding Propeller
Spinlock flush throttle control
Fuel filter and water seperator
Waterlock muffler
42 Litre rigid plastic fuel tank

12Volt DC Distribution Panel
Start battery
House battery
Alternator 80 amp
LED Navigation Lights
1 Manual bilge pump

General Specs;
LOA - 9.15 m
BOA - 3.05 m
Draft - 2.60 m
Fuel Tank - 42 L
Engine - 15 hp
Designer - Dunning and Associates

Designed and constructed in accordance with the requirements of ISO 12215 Category A as per ISAF Offshore Special Regulations, Section 3.03.1 a)
E glass, foam core, vinylester resin infusion

Carbon fibre keel fin
Lead Bulb
Retractable for motoring in shallow water & transport
Optional keel block to raise keel by 300mm for reduced draft sailing (removable for O.D.)
Optional removable crane for keel retracting
Optional Weed cutter for keel fin

Carbon fibre rudder stock
Self aligning Jeffa bearings

Harken Deck Gear Package
2 x Primary Winches - Harken 40.2 PTP (Plain Top Performas)
2 x Runner Winches - Harken 35.2 STP (Self Tailing Performas)
4 x Harken winch handles
Carbon fibre air foil stanchions, pushpits and pulpits
Stainless Steel 1/19 wire lifelines
Fixed bow pole easily removable from socket in bow
4 x Spinlock XTR rope clutches in pit (jib, frac, MH, tackline)
Running Rigging Supplied by Sydney Rigging Specialists & Southern Spars:
2 x Jib sheets
2 x Spinnaker sheets (lead under deck to trimmer)
1 x Tack line lead to stb side of pit (1:1 and 2:1 options as standard
2 x Running backstay tails
Jib In/Out purchase lead to jib trimmer on both pt & stb side
Jib Up/Down purchase lead to jib trimmer on both pt & stb side
Jib Cunningham purchase lead to jib trimmer on stb side
Spinnaker Take down line lead to cockpit aft
Mainsheet coarse tune on swivel cleat in cockpit
Mainsheet fine tune purchase lead to main trimmer
Traveller purchase lead to main trimmer
Main Cunningham purchase lead aft to main trimmer
Main Outhaul purchase lead aft to main trimmer
Vang purchase lead aft behind traveller
Carbon fibre tiller with spinlock tiller extension
Carbon fiber helmsman and main trimmer foot bars
4 x Inspection ports on cockpit sides for rope tails
McConaghy custom sliding forward hatch with pneumatic seal. Rounded edges of front hatch for smooth spinnaker hoists and drops. Hatch seal pump located in cockpit.


Rig + Rigging - Supplied Exclusively by Southern Spars
Carbon fibre Mast
Two sets of swept back carbon spreaders
Split two piece mast with reuseable join for ease of road transport
Internal Hydraulic Mast Jack easily adjustable when sailing
Optional Easily adjustable mast step with screw for prebend tuning & hinging mast base to allow rig to be lowered aft
Main halyard lock
Jib halyard (Vectran) with XTR rope clutch
1 x Mast head spinnaker halyard
Optional 2nd Mast head spinnaker halyard with XTR rope clutch (removable for O.D.)
1 x Fractional halyard
Optional bullet lock for fractional halyard (removable for O.D)
Optional genoa staysail halyard with XTR rope clutch (removable for O.D.)
Adjustable Forestay with lashing
Carbon Fibre Boom includes 2 reef lines with in built XTR rope clutches and outhaul purchase
Hinging mast base for easy stepping and lowering of mast. (Mast hinges aft through
Optional 1706 Tuff Luff for headstay
Optional Variable thickness shim stack for hydraulically adjustable mast step (light medium heavy)
Optional mast lowering poles and car assembly

Owner supplied inventory, but talk to Ancasta for full specs and discounted rates.
...Read full description
ManufacturerMc Conaghy
Mooring CountryChina
Year built2016
Length9.45 m/31 ft
Categoryfin keel
Engine manufactureryanmar 15 hp
Material hullglass reinforced plastic
£ 144,038
SubcategorySailing Boats
Year built2020
Length1 m/3 ft
Sail area -
McConaghy Factory China, China
SubcategorySailing Boats
Year built2020
Length14.02 m/46 ft
Sail area -
McConaghy Factory China, China
£ 195,478
SubcategorySailing Boats
Year built2011
Length13.72 m/45 ft
Sail area -
£ 422,048
SubcategorySailing Boats
Year built2020
Length12.5 m/41 ft
Sail area -
McConaghy Factory China, United Kingdom
Ancasta Raceboats
Profile page