£ 130,290
Ancasta Raceboats
Profile page
ad ref. BCU015D55F
£ 130,290
listed price: 150.000 €
Vat Excluded / Not Paid


Sailing BoatsINFINITIModel 36United Kingdom

The INFINITI 36 GT "Skazka" is a full carbon race yacht, designed around the DSS foil technology that is pushing our sport forward.

Not only does this concept improve performance, it improves handling and sea keeping characteristics in abundance and really makes this quite a versatile little yacht.

Built by Danish yachts in 2013 and only raced a handful of times since new, this boat is designed to be enjoyed with a small crew, that like the thrill of going fast, whilst maintaining a design point of difference under rating rules.
Very, very lightly used and ready for someone to have a blast with.

Safety and security equipment (No guarantees given as to compliance of safety kit - several items will need service dates renewing)
2 x Fire extinguishers: as required by EU standard and ISAF Spec.
Marine Grade 1 x life raft: 8 men liferaft EU standard
8 x Life vests: as required by EU standard and ISAF Spec.
1 x anchor with 2 metres chain: as required by EU standard and ISAF Spec.
6 x fenders

5 x Bunks: Carbon fibre, there are no pipecots, white finish according to interior coating
Bunk lee cloths, according ISAF Spec. Reg.
Portable toilet: Porta Potti
4 x Inspection hatches: Circular watertight. Colour white according interior coating
2 x Henderson round hatches on aft bulkhead, for ventilation.

Hull below WL coating: white anti-fouling system “Nautic A4”.
Hull ext. coating: Alexseal
Deck ext. coating: Alexseal
Interior coating aft: as built sealed with wax Peppermint hull and cockpit and snow white deck.
The interior is International white satin.
Keel, bulb, rudder and foil: Nautix white anti-fouling as per hull


Delivered in May 2013.
State of the art design.
Exclusive DSS foil technology.
Unequalled performance and ride at this size.
Cruising or racing.
Full carbon build by Danish Yachts.

Keel fin: Carbon keel fin + carbon keel trunk
Bulb: Lead bulb Wing foil: Carbon foil
Rudder: Carbon Steering
Rudder: Custom Isotop Carbon rudder stock and blade
Carbon wheel: 2 x Steering wheels 900mm diameter w/3 carbon spokes + carbon rim w/ wooden inserts
Pedestal: 2 x carbon pedestals through deck installation for steering lines
Emergency steering system: Stainless steel emergency tiller in accordance to ISAF special regulations

DSS Wing Foil System
Foil drive and motion system: Custom c-designs rack and gear type.
Electrical motor to move foil. Cockpit switches and buttons Propeller lifting system
Propeller box: Carbon fibre.
Propeller box hull case: Carbon fibre, bonded and laminated to the hull.
Universal joint: Marine grade joint

Deck equipment
Triple unit halyard stopper: 2 x Spinlock XCS0814 silver triple unit. Halyards 2 gennaker, 1 jib, 1 main 2 reef lines
Single unit stopper: 2 x Spinlock XCS0914 silver single unit. Deflector and Outhaul
Single unit cam cleat: 3 x Spinlock PXR Cam Cleat PXR0810/SW for boom vang and cunningham control line
JIB sheet control: 2 x Kohlhoff loop alu diam.46 ring KH-LRING46
JIB sheet control: 2 x Karver diam.57 Carbo T2 loop soft attach block #21K1
Main sheet system: Karver- [#2604x1/#2602x2/#2148x1/#144x1/#2135x1/ #2646x1] Gennaker sheet blocks: 2 x Karver diam. 57 high load sheave; installer in a carbon sheave box
Tack line control: 2 x Spin lock side mount. Stopper XCS-SMNT HPW
Mast base blocks: 8 x Harken diam.57 mast base halyard block #1988

Primary winches: 2 x Harken performa quatro 2 drums 4 speed self-tailing [46STQP]
Cabin top winches: 2 x Harken performa 2 speed self-tailing [40.2STP]
Running BS winches: 2 x Harken performa 2 speed self-tailing [40.2STP]

Mooring cleat: stainless steel X-foldbar cleat 153mm
Lifelines: 4 x Stainless steel
Stanchions: 8 x Stainless steel
Pulpit: Stainless steel
Stern push pit: 2 x stainless steel
Forward hatch: Lewmar 18" low profile hatch
Aft hatch: Carbon fibre flush
Winch handles: 4 x Harken aluminium, black handles 2 x Speedgrip #B10A5G / 2 x Speedgrip #B8A5G
Ensign staff: Carbon fibre wing section profile
Manual compass: plastimo .
Lashing for blocks: 15 x Spectra lashing for blocks attachments
Foot bars: 4 x Carbon fibre, clear finish
Tweaker block: Kholhoff Loop block 45 w/diamond knot
Cockpit tweaker control: 2 x Karver Ball bearing cam cleat #150

Electrical panel: Carbon fibre, clear finish
Engine start battery bank: Optima batteries/ Specifed by Danish Yachts
House battery bank: Optima batteries/ Specifed by Danish Yachts
Navigation lights: Tri-colour masthead
Interior lights: Led lights

Communications and navigational equipment
Nexus Instrument display repeaters at mast.
Load cells for wing foil

Bilge Manual pump.
Electrical pump, rule 500GPH, in engine space

Rigging Rig Mast: High modulus Carbon, 2 Spreader, Section 176m.
Regatta split for transport.
Clear coat Boom: Standard Modulus carbon and foam core box boom.
Clear coat Vang: Aluminium telescopic gas strut.
Integral 3:1 system Bowsprit: Carbon Fibre moulded to hull - removeable
Mast jack: Internal hydraulic jacking cylinder Enerpac 10T all system fittings included
Mast step: Female type aluminium mast base. Fore & Aft adjustment by bolts

Wind instruments: Located at Mast head
Windex: 12V system with windex light
Standing rigging: EC6 Carbon rigging complete package, including tangs, turnbuckles, seats and misc. fittings
Running backstays: 5T Kevlar eye to eye Backstay deflector: x 2
Forestay foil: hank on headsails, no foil
Instrument bracket: carbon fibre
Chainplates bushing P&S: x 2 - Stainless steel 316, laminated to hull deck joint
Chainplates pins P&S: x 2 - Stainless steel 316
Forestay toggle and pin: Stainless steel 316

Sail inventory
All sails by North Sails, Denmark
Mainsail and boom cover: 44.4m2 - 3Di + fully battened
Light Jib: 3Di 105% 30.5m2 + 1 full batten 3 leech battens
Medium Jib: 3Di 90% 20m2 + 1 full batten 3 leech battens
Heavy Jib: 3Di 105% 30.5m2 + 1 full batten 3 leech battens

A1 ASYMMETRIC - Gradient Superlite 40
A2 ASYMMETRIC - Gradient Superkote 60
A5 ASYMMETRIC - Gradient Maxikote 150

Storm Jib - C-cut Polyester Nordac
Quad: Gradient Aramid Laminate T1 ZL06
...Read full description
Mooring CountryUnited Kingdom
Year built2013
Length11 m/36 ft
Categoryfin keel
Material hullcarbon fibre
£ 133,715
SubcategoryRacing Boats
Year built2021
Length10.06 m/33 ft
Sail area -
McConaghy Factory China, China
SubcategoryRacing Boats
Year built2021
Length14.02 m/46 ft
Sail area -
McConaghy Factory China, China
£ 186,749
SubcategoryRacing Boats
Year built2011
Length13.72 m/45 ft
Sail area -
£ 391,801
SubcategorySailing Boats
Year built2020
Length12.5 m/41 ft
Sail area -
McConaghy Factory China, United Kingdom
Ancasta Raceboats
Profile page