£ 401,634
listed price: $ 530,000Vat Excluded / Not Paid

Botin - 40

Botin - 40 Sailing Boats for sale in Japan at Boatshop24.co.uk
This feature requires you to be logged on boatshop24

You can login to your account or create a new account.
Send this classified to a friend!
Fill in the form below

"Your name" must be filled.
"Your email" must be filled.
"friend name" must be filled.
"friend email" must be filled.
Please select the I'm not a robot box.
your name:
your email:
friend name:
friend email:
Category:Sailing Boats
Mooring Country:Japan
Year built:2013
Length:1.22 m/4 ft
Category:fin keel
Engine manufacturer:30hp
Material hull:carbon fibre

The Botin designed 'Swing' is now available.

From the most successful drawing board of recent times, she is probably the most competitive 40 foot IRC boat on the market today.
Included in the package is a new 2016 rig from Hall Spars and a full 2016 North inventory.
Step into any IRC fleet in the world with this boat and you will be on the money and with multiple victories over newer designs, there are facts to back up these claims.....
Get in touch now to discuss the options.
**** 1st Place at Autumn regatta 2016, ahead of Carkeek and Ker 40+ designs****

3 x Red/white cabin lighting in saloon, galley, heads and navigation areas
12 volt DC switch panel
Battery isolator/selection switch
2 x House Batteries, 1 x Engine Battery
Navigation Lights Pulpit, Pushpit mounted

Freshwater Hand pump at galley sink
Lightweight head
2 Manual bilge pumps
2 x 50 liter fresh water bladder tanks

Galley: 1 x sink & 2 burner stove
Head located fwd of mast bulkhead
2 x pipe cots
Engine box with integrated bottom steps
Exterior and interior Finish

Urethane paint finish to top sides and deck gloss areas(light color)
Paint finish Non-skid areas on deck
Cockpit Floor, Non-skid
Below water line finished with epoxy primer
Painted Satin Finish between companionway BHD and Mast BHD
FWD & AFT Area will be Satin clear Carbon Roller Finish.

Up to and including CAT 4 safety equipment supplied.

Built by McConaghy Boats from the Botin Partners drawing board, SWING is an un-compromised, Grand Prix racer at the very highest end of the build quality spectrum.

Pre-preg carbon and Nomex construction throughout has meant the tightest control on weight and stiffness during the built.
You will be hard pushed to find a lighter 40 foot hull anywhere in the world.

Pre-preg carbon nomex Hull, Deck & Structure (Female Hull Tooling)
Autoclaved pre-preg carbon Bow Pole (removable)
Autoclaved pre-preg carbon Tiller
Designed and constructed in accordance to ISO 12215 structural regulations to Class A with approval by Germanischer Lloyd.

IRC TCC: 1.255 (2016)
LOA 12.20 m
LWP 11.53 m
Beam 3.80 m
Draft 2.85 m
Displacement 4080 kg
Fuel Capacity 40 l
Engine Power 30 hp
Builder McConaghy Boats
Naval Architects Botin Partners

Deck Hardware

Full Harken deck gear package
2 x Primary winches Harken B50.2 STP
1 x Pit winches Harken B46.2STP
2 x Main Winches Harken B46.2STP
2 x Backstay winches Harken B 35.2 STA
7 x Spinlock clutches with custom organizers
1 x Harken angled pedestal, linked to primary winches.
Simplified string drop spinnaker system, with control line led on deck.

McConaghy autoclaved glass aerofoil stanchion’s & pulpit and pushpit
Stainless steel 1/19 wire lifelines
4 clear dinghy hatches in cockpit sides for rope stowage
Deck Hardware listed as below:

QTY Model Items
6 XCS0814/1 Spinlock Clutch
1 XX0812 Spinlock Clutch
6 SPBE12 Spinlock 12mm self aligning bulleye
2 1963NP Harken Hi –Load 57mm single foot block
4 3195 Harken 57mm loop block
2 2641NP Harken 40mm Carbo triple block w/becket
2 2640NP Harken 40mm Carbo triple block
2 2146NP Harken T2 Single block 29mm
2 459NP Harken Cam-Matic w/X-treme angle fairlead
2 C8882 Harken Floating ring-sheet lead
2 C8541 Harken Fairlead Assy-MR PR Jib
2 3206NP Harken 6mm Low load folding padeye
2 1963NP Harken Hi-Load 57mm single foot block
2 2655 Harken 40mm Carbo Fiddle
2 2149NP Harken T2 Single block 40mm
2 240NP Harken Swivel Bullseye w/#150 Cam-Matic Cam Cleat
2 137 Harken Large Stainless eye strap (fits 150 Cam )
2 C8728 Harken Car Assy-BB CRX TP52 Jib
1 3079.2m Harken Big boat CRX Roller Track
5 1988 Harken 57mm Fixed Mastbase Block
1 1986 Harken 44mm Halyard Block
1 1984 Harken 44mm Halyard Crossover Block
2 2149NP Harken T2 Single Block 40mm
2 240NP Harken Swivel Bullseye w/#150 Cam-Matic Cam cleat
2 3207NP Harken 6mm Folding padeye
4 3195 Harken 57mm Loop Block
4 3207NP Harken 6mm Folding padeye
1 3174 Harken Big Boat 32mm Hi-Load Double sheave end controls
1 T3205B.HL Harken Big boat 32mm Hi-Load captive Ball Loop car
4 2644ASSY Harken 40mm Carbo Cheek Block
2 459NP Harken Cam-Metic w/x-treme Angle Fairlead
2 096NP Harken upright Bullet Lead Block
2 287 Harken Bullet Thru w/Stainless coverplate
3 3196 Harken 75mm Loop Block
2 3195 Harken 57mm Loop Block
2 3207NP Harken 6mm Folding Padeye
4 3196 Harken 75mm Loop Block
2 3195 Harken 57mm Loop Block
1 629 Harken Large Round Stainless Steel Padeye
6 3207NP Harken 6mm Folding Padeye

Autoclaved prepreg carbon rudder stock
Corecell foam cored, carbon skin rudder blade
Autoclaved Carbon Fibre Tiller + Spinlock Tiller extension
JP3 Upper and Lower self-aligning rudder bearings

Speed/Depth transducer, with flush fittings to hull
Clinometer including trim and heel.
MHU 1050mm wand
MHU Cable Ultralight Teflon
4 x H3000 20/20HV Display Pack
1 x H3000 10/10HV Display Pack
Fastnet Mast Base Junction Box
25m braided sock
Heat Shrink
16mm B&G Loadcell
Shakespeare Heliflex Masthead Stub Antenna
Hercules Performance Base Pack

30 hp Yanmar Diesel engine with sail drive
Folding 2 bladed prop
Spinlock Flush throttle control
40 Litre rigid plastic fuel tank (60 Litre optional)

Keel & Bulb
Fabricated high tensile steel Fin (approx. 230 Kg).
Bulb 2000kg approx.


New, taller, High Modular Halls Spars rig with optimised stiffness criteria and integrated deflector systems. 2016.
P: 17.35
E: 5.63
J: 4.99
FL: 17.56
STL: 7.37

Spare Hall Spars NZ tube. 2013.
P: 16.8
E: 5.6
J: 5.01
FL: 17.02
Comprehensive running rigging package supplied with boat, along with assorted spares.

Hall 236C carbon section with taper
High modulus HR40 prepreg carbon fibre
Autoclave cured 85 PSI at 250 degrees Fahrenheit, 120 degrees Celsius at 6 bar
Seamless mast tube made on a mandrel, with a reusable join
Deep panel, carbon Boom

Deflector entry point below hounds to internal 2:1 purchase.

Hall carbon mast track suitable of bolt rope sails
PR-11214-1B bolt rope feeder

Hall Internal tang (PR-11736-1) to accept -12 rod

Two (2) sets of tapered carbon aerofoil spreaders
Spreaders attach using spreader bars, alloy, hard anodised
Spreader ends S1 to suit tip cups for rod rigging or continuous carbon rigging
Spreader ends S2 to suit spreader bends
Diagonals terminate in spreader bars

One (1) masthead spinnaker halyard starboard forward
One (1) masthead spinnaker halyard port forward
One (1) fractional spinnaker/second genoa halyard
One (1) genoa halyard
One (1) staysail halyard

Main halyard on lock to exit below deck to a horn cleat
Deflector exit to below deck purchase system
Mast jack, with internal pump

Tuff Luff -7001.16m
Assembled on headstay
Carbon -22 headstay
Headfoil to suit carbon -22 headstay

VI - 17 Nitronic 50
V2/D3 - 12 Nitronic 50
D1 - 15 Nitronic 50
D2 - 10 Nitronic 50
Backstay 5T Kevlar


2016 North 3Di RAW inventory;
Delivered 14th June 2016
Main #3
Main #4
Spin Staysail

A1-B (re-cut) - 2016/4/6
A1-C - 2016/6/14
A1.5-D (re-cut) - 2016/4/6
A1.5 -E - 2016/6/14
A2-B (re-cut) - 2016/4/6
A2-C - 2016/6/14
A0-B - 2016/7/4
A3-A (re-cut) - 2016/4/6

Recut Medium (2015)
Recut Light (2015)

Model40Rig namesloop
Type of cockpitaft cockpitDrive typesail drive
Ancasta Raceboats
Ancasta Raceboats
28 ads