Mc Conaghy - Ker 46+
Ancasta Raceboats
Profile page
ad ref. BCU8488A1A
Vat Excluded / Not Paid

Mc Conaghy - Ker 46+

Sailing BoatsRacing BoatsMc ConaghyKer 46+

The McConaghy Ker 46+ is a phenomenal evolution of the already successful Ker 46. A pure thoroughbred racing machine.

She is designed for first-rate performance on the race track, whether inshore or offshore. Weighing almost 1000 kg less than her predecessor and with a plethora of technological advancements throughout, the Ker46+ is a step up the performance curve and is all set to deliver impressive results on the water.
Two boats now built and sold, the lastest offering incorporating a new low-aero bow profile.
A generously sized deep ‘T’ shaped lead bulb keel with a high Ballast
to Displacement ratio
Keel and Keel attachment is in excess of ISO structural regulations
to Class A with plan approval by Germanischer Lloyd
Deep SG Iron ?n keel with composite fairings
Lead T-Bulb
Stiffness optimised all carbon keel structure
Fin and Bulb are delivered faired and undercoated

LOA 13.7 M
Disp. 5500 Kg
Beam 4.50 M
Draft 3.35 M
ISO Structural CAT. A ISO OSR CAT.1

Full carbon construction with vacuum consolidated carbon/epoxy/foam sandwich throughout with uni-directional fibre reinforcement.
A full optimised structural design using advanced Finite Element Analysis techniques.
Designed and constructed in accordance with ISO structural regulations to ‘Class A’ with plan approval by Germanischer Lloyd. Lightweight sandwich composite non structural internal components
White Awl Craft paint finish to top sides and deck gloss areas. Paint finish Non-skid areas on deck.
Cockpit Floor: Non-skid grip tape Below water line Finished with Epoxy primer

Taking the structural optimisation to levels rarely seen outside of Americas Cup, the final lamination is the product of structural weight v stiffness optimisation, and the deflection of the shape under sailing loads is taken into account in the definition of the moulded shape. Construction is from pre-preg Carbon and carefully selected foams throughout; a large weight saving from the build method used on the infused Ker46 design. The keel and mast support structure follows our tried and tested approach, built in the autoclave on machined aluminium moulds for reliability and accuracy.

2 x Driven Primary Winches Harken 65.3 STR UD
1 x Harken MX Pedestal mounted AFT of traveller
1 x Pit Winches Harken 50.2 STP
2 x Main Sheet Winches Harken 50.2 STP
2 x Backstay Winches Harken 46.2 STP
Harken ‘Pro-Trim’ Traveller system
9 x Spinlock Clutches along with custom organizers
Composite Aerofoil Stanchions, Pushpit & Pulpit
Stainless Steel 1/19 wire lifelines
5 x Clear dinghy hatches in cockpit sides for rope stowage
Sliding fore hatch with in?atable seal
String drop system lead to primary winch
McConaghy carbon ?bre winch handle pockets
Foredeck toe rails to ORC Standard

Autoclaved prepreg carbon rudder stock
Corecell foam cored, carbon skin rudder blade
Autoclaved Carbon Fibre Tiller + Spinlock Tiller Extension
JP3 Upper and Lower self-aligning rudder bearing

40 hp Yanmar diesel engine with Sail Drive
Folding 2 bladed prop
Spinlock flush throttle control
70 Litre rigid plastic fuel tank

Red/white cabin lighting in saloon, galley, heads and navigation areas
12 volt DC switch panel Battery isolator/selection switch
2 x House Batteries,
1 x Engine Battery
Navigation Lights Pulpit, Pushpit mounted

P 19.30 M
E 6.00 M
I 17.72 M
J 5.10 M
SPA 235 M²
STL 7.5 M

RIG - Southern Spars
High Modulus Carbon Rig
2 x Sets carbon spreaders
Nitronic 50 standard rigging
Kevlar Backstays
Carbon Boom
2 reef lines with integrated clutches
Tuff Luff Head Foil
Optional Lock on Halyards

2:1 Mainsail Halyard
1 x Fractional Jib Halyard
1 x Fractional Spin/Jib Halyard
2 x Masthead Spinnaker Halyard
1 x Mainsheet
2 x Spinnaker Sheets
2 x Jib Sheets
Main Cunningham with purchase
Outhaul purchase
2 x Reef lines
Vang purchase
Jib car in haul adjuster with purchase
Jib lead up down adjuster with purchase
2 x Spinnaker tack lines
1 x Bobstay

Freshwater Hand pump at galley sink
Lightweight heads
2 Manual bilge pumps
2 x 50 litre fresh water bladder tank

Under cockpit navigation station and seat
Galley: sink, Custom twin burner stove, 1 x cool box
Enclosed Head surround
8 x pipe cots
Engine box with integrated bottom steps

...Read full description
SubcategoryRacing Boats
ManufacturerMc Conaghy
ModelKer 46+
Mooring CountryChina
Year built2021
Length14.02 m/46 ft
Categoryfin keel
Engine manufactureryanmar diesel 40 hp
Material hullcarbon fibre
£ 134,776
SubcategoryRacing Boats
Year built2021
Length10.06 m/33 ft
Sail area -
McConaghy Factory China, China
£ 183,524
SubcategoryRacing Boats
Year built2011
Length13.72 m/45 ft
Sail area -
£ 394,907
SubcategorySailing Boats
Year built2020
Length12.5 m/41 ft
Sail area -
McConaghy Factory China, United Kingdom
£ 269,500
SubcategoryRacing Boats
Year built2021
Length11.28 m/37 ft
Sail area -
Lymington, South East
Ancasta Raceboats
Profile page