£ 8,000

Maurice Griffiths - Lone Gull II

Maurice Griffiths - Lone Gull II Classic Sailing Boats for sale in Salcombe at Boatshop24.co.uk
This feature requires you to be logged on boatshop24

You can login to your account or create a new account.
Send this classified to a friend!
Fill in the form below

"Your name" must be filled.
"Your email" must be filled.
"friend name" must be filled.
"friend email" must be filled.
Please select the I'm not a robot box.
your name:
your email:
friend name:
friend email:
Maurice Griffiths - Lone Gull II
1 of 2
  • Maurice Griffiths - Lone Gull II1 Of 2
  • Maurice Griffiths - Lone Gull II for sale in United Kingdom2 Of 2
Category:Sailing Boats
Subcategory:Classic Sailing Boats
Manufacturer:Maurice Griffiths
Model:Lone Gull II
Mooring Country:United Kingdom
Year built:1977
Condition:for hobbyist
Sale:On behalf of customer
LOA:8.53 m/28 ft
Width:2.74 m/9 ft
Draft:1.07 m/4 ft
Engine manufacturer:Buhk
No. of engines:1
Fuel Capacity:77
Material hull:GRP
Material deck:GRP
Fresh water capacity:77
No. of cabins:2
No. of berths:6
WC & bathrooms:1

Maurice Griffiths Lone Gull II Project, for sale lying Salcombe. This Maurice Griffiths Lone Gull II Project has been in the same family since new. It was owned by the farther who unfortunately never managed to finish the boat, the son has now taken over the project with the boat moving from Chichester to Salcombe, where she goes afloat every summer. With so many other commitments its with great sadness that he brings the boat to market so hopefully she can be finished off to the high standard that the various elements already completed have been done to. She has the original engine in her since new but has only been run under the supervision of a marine engineer so has done very very few hours. She will make a lovely boat for someone who has the time skills and imagination to finish her in a way that suits them.

The Traditional layout of this boat would be 6 berths in two cabins, with two settee berths in the saloon with 2 pipecot berths above each, A galley to port, a chart table to starboard, a head forward to starboard, and v berth forward. However this could be fitted differently by the new owner to fit their needs.

Maurice Griffiths Lone Gull II Project
Traditional layout
Maurice Girffiths Lone Gull II Project

GRP hull, deck and superstructure.
Full Length Fin, with twin Bilge.
Transom Hung Ruder.
Coppercoat applied (April 2016).

Buhk 20hp 3 Cylinder Diesel Engine.
Shaft drive to 3 bladed bronze propeller.
Cruising Speed 6 knots.
Top Speed 6.5 knots.

2 x Lewmar Winches.

Navigation Aids
Plastimo Bulkhead Mounted Hand Bearing Compass.

Ground Tackle
2 x 35kg CQR anchors.

1 x Fuel Tank, Stainless Steel, 20 Gallons Approx (Pressure test Certificate Available, not fitted).
1 x Water Tank, Stainless Steel, 20 Gallons Approx (Pressure test Certificate Available, not fitted).


Bronze Port Light Frames and Glass.Laminated and Epoxy Coated Bowsprit.Stainless Steel Bowsprit Fitting and Bob stay Fitting.Shaped and Epoxy Coated English Oak Davits.Port & Starboard Saloon Cupboard Fronts, Doors Fitted and Seal Coat Applied.MG designed Fore Hatch made in Teak.Cupboard Front Port side, Opposite Heads.Cupboard Unit, Starboard Forward.4 teak faced panels for cockpit seats, and Both Locker Lids.Main Companion Grab Handles.
Owners Comments
My Father purchased the bare hull of the first GRP Lone Gull to come from the mould which was taken from an original wooden vessel. Moulded in two parts, the deck mould with the dog house included. My Father had planned to fit her out from scratch, but unfortunately ran out of time. Whilst many components are constructed and finished, they have been removed to allow more space to work. The davits are made from solid English Oak and have been epoxy coated to preserve them. The bowsprit has been formed and is ready for fitting; however, any new owner has the choice as to which rig they prefer, with or without a bowsprit. The oak crooks were fitted in the late seventies and epoxied with a balsa padding layer between the hull and the crooks to take the strain of the rigging. All the windows have been cast in Admiralty Bronze and most have been fettled and polished by hand ready for drilling and fitting. The oval glass has been cut and ready for fitting. I would be very happy to discuss all the plans that I know about, there as a set of MG’s working drawings as well to go with the boat. This Maurice Griffiths Lone Gull II Project will make an excellent project which, depending upon the time available, would take 1 or two winters to complete ready to take the rig.

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
ModelLone Gull IIMaterial deckGRP
Devon Boat Sales Ltd
Devon Boat Sales Ltd
31 ads
Call: +44 (0) 1548 800503
Or: 0044 (0)7909901184
or send email message
Advice about buying on www.boatshop24.co.uk - Please read
read more >
Maurice Griffiths - Lone Gull II
Maurice Griffiths - Lone Gull II
£ 8,000
United KingdomSouth West, Salcombe, United Kingdom ad ref. BS717F9F2  -  655 views