2024 Arksen 85 Explorer Yacht26m

• Built to commercial regulations - MCA Workboat Code, Category 0, Unrestricted.
• Incredibly stable and safe - capable of self righting through 180 degrees
• Large aft deck with maximum payload of 4,000kg. Storage for tender up to 6 metres in length.
• Accommodation for 8 to 14 with a variety of layouts. 
• Up to 7,000nm range
• Solar array option provides zero-carbon electrical power
• Onboard systems use thermal reclaim for improved efficiency
• Hybrid propulsion option provides increased efficiency, lower emissions allow for silent running

‘GO ANYWHERE’ CAPABILITY

• Exceeding MCA Category 0 build regulations for unrestricted operation
• Hull built to exceed Lloyds SSC G6 structural rules for unrestricted service.

SAFETY

• 180 degrees of positive buoyancy (self righting) in cruising trim

SIGNIFICANT AUTONOMOUS OPERATION CAPABILITY

• 7,000nm range at 9 knots thanks to a hyper efficient hull design
• High capacity water maker
• Large amounts of storage
• Low maintenance requirements.

COMFORT IN TOUGH CONDITIONS

• Sea-kindly and stable hull design aided by active fin stabilisers and optional gyro stabilisers
• Insulation and climate control to cope with both high latitude and tropical conditions.

LEAVE NO TRACE

• Zero discharge capable through the latest waste management hardware
• Zero emissions capable whilst operating in full electric mode with optional hybrid propulsion system
• Zero emissions capable at anchor with optional solar power generation.

SUSTAINABILITY

Hull and superstructure built in low carbon, recycled aluminium.

We know that one of the best things about owning an Arksen is the stunning scenery you will see from onboard, so we have designed multiple seating areas where you can sit and soak up your surroundings.

AFT DECK DINING AREA The aft bench is reversible to face forward or aft. The table can be lowered and, with a cushion infill, creates a lounging pad. To port is a BBQ/grill, fridge and sink.

FORWARD SEATING AREAS There is a bench seat up on the bridge deck for panoramic views when underway, or for privacy when moored. On the main deck there is a large lounging area with a coffee table that can be converted into a sun bed. Forward of this seating is additional space for truly stunning alfresco dining. A bimini can also be placed over this area when required.

BRIDGE DECK DINING AREA Aft of the bridge deck is a third outdoor dining area within easy reach of galley via the internal stairs and with access to the 360 degree external walkway.

BRIDGE DECK LOUNGING PAD The central table can be lowered and a cushion insert forms another large lounging area, for ultimate relaxation.

It’s not just the design that has been carefully thought out but also the choice of materials used. Our partners at Design Unlimited have gone to great lengths to source durable and environmentally friendly products and fabrics to fit out this eco-conscious vessel. Design Unlimited are an innovative yacht design studio with an established reputation for excellence in both interior design and exterior styling. The multi-award winning team excels in new challenges, creating designs for everything from modern luxury motor yachts, large sailing superyachts and classic gentlemen’s yachts to racing yachts.

BRIDGE DECK

Comprehensively equipped bridge, superb 360 degree views and an internal stair that allows safe access to the main deck in all conditions.

A door to port of the helm and another aft provide access to the 360 degree external walkway, connecting a Portuguese bridge with sofa forward and dining area aft.

SALOON

Seating raised to window height provides an all-around view. Forward study area with option for a concealed helm position. Access to the side deck via a starboard side door and to the aft deck via a lobby/wet room, from where there is an internal stair to the bridge deck.

GALLEY

Sociable, open galley with superb views and easy access to multiple dining areas in the saloon, bridge deck, aft and forward decks. As an alternative the galley can be located on the lower deck.

MASTER CABIN

UK King size bed with spacious access all around and large storage below. Adjoining snug with desk and sofa. Large panoramic windows to port and starboard. Very large walk-in shower (optional steam room) with large window, full size head, excellent storage, heated mirror

GUEST CABIN

Both the port and starboard guest cabins have berths that can be configured either as twins or as a double. A third, Pullman berth is optional.

CREW

Complete with en-suite and fitted out to the same standard as the rest of the yacht. Direct access to the utility room stores. Well separated from the owner / guest accommodation.

The Arksen 85 is built in partnership with Wight Shipyard Company, one of Europe’s leading shipyards with an established reputation for providing vessels built to the highest possible standards. The Wight Shipyard Company has a wealth of knowledge spanning commercial, defence and superyacht projects. There are very few shipyards that have achieved success across all three of these sectors, and it is Wight Shipyard Company’s comprehensive experience in all of them that sets it apart. The rare ability of combining the best elements of each sector results in the creation of the ultimate Explorer Vessels in partnership with Arksen.

We take responsibility to ensure that the materials used in building our vessels have as minimal an environmental cost as possible, both during production and use, and that they are fully recyclable at the end of life. This is why the aluminium used in building Arksen Explorer Vessels contains up to 40% recycled content. Other reasons for using aluminium are:

• 100% recyclable. Around 75% of all aluminium ever produced is still in use.
• Excellent qualities in terms of weight, strength, corrosion resistance and insulation. •
• 15% to 20% weight saving over steel means less propulsion power required, less fuel consumed and less emissions.

The Arksen Explorer Series benefits from combining the best aspects of luxury yachting and commercial shipbuilding. The stylish exterior and luxurious interior are combined with a faster build time, lower operating costs, greater reliability plus engineering and construction which has already been proven in the commercial sector

Builder: Arksen Ltd, UK Naval Architecture: Humphreys Yacht Design, UK

Exterior Design: Humphreys Yacht Design, UK

Interior Design: Design Unlimited, UK

Structural Regulations: Lloyds SSC Classification: UK

MCA Category 0, Unrestricted

Hull Type: Low Displacement Length (LDL) Hyper Efficient

Hull Material: Aluminium (Up to 40% recycled content)

Superstructure Material: Aluminium (Up to 40% recycled content)

Accommodation: 8 to 14 depending on choice of configuration

Main Engines: Twin Cummins QSL9, 246kW (330bhp) at 1,800rpm Option: Praxis Hybrid System

Thrusters: 36kW (46hp) hydraulic tunnel thruster Option: Swing down stern thruster

Trim Tabs: Transom mounted active interceptors to mitigate pitch and roll

Stabilisers: Zero speed fins - roll reduction underway and at anchor Option: Seakeeper gyro stabilisers

Range: 7,000nm at 9 knots

Efficient Cruise Speed: 9 - 12 knots

Maximum Speed: 14 knots

Generator: Kohler 35kW Option: Backup generator Option: Solar

Power Management: AC power provided by generator or inverters or a combination as required Generator auto start and shutdown as required

Air Conditioning: Variable frequency matching load to demand to avoid on/off cycling

Watermaker: High capacity, 300 litre per hour

Lazarette: Large transom door opens to form an extended aft platform The spacious lazarette can be fitted out as required e.g. dive centre

Aft: Load capacity of 4,000kg Maximum tender length of 6 metres Outriggers to port and starboard for lifting Option: Hydraulic deck crane Option: Arksen Adventure Pod fitted out to meet requirements Option: To keep the aft deck clear when stationary the vessel can be fitted with tender chocks that extend to port and/or starboard so that tenders can be carried outboard.

Foredeck: Folding davit for small tenders, toys and equipment