2022 McConaghy MC319m

Interior
2 x setee seats with lifting lids in saloon area
2 x setee seat cushions - black with red piping
Light weight "porta potti" head
Removable ice box cooler under companionway step.

15 hp Yanmar diesel engine with Sail Drive
2 Blade Folding Propeller
Spinlock flush throttle control
Fuel filter and water seperator
Waterlock muffler
42 Litre rigid plastic fuel tank

12Volt DC Distribution Panel
Start battery
House battery
Alternator 80 amp
LED Navigation Lights
1 Manual bilge pump

General Specs;
LOA - 9.15 m
BOA - 3.05 m
Draft - 2.60 m
Fuel Tank - 42 L
Engine - 15 hp
Designer - Dunning and Associates

Designed and constructed in accordance with the requirements of ISO 12215 Category A as per ISAF Offshore Special Regulations, Section 3.03.1 a)
E glass, foam core, vinylester resin infusion

Keel
Carbon fibre keel fin
Lead Bulb
Retractable for motoring in shallow water & transport
Optional keel block to raise keel by 300mm for reduced draft sailing (removable for O.D.)
Optional removable crane for keel retracting
Optional Weed cutter for keel fin

Rudder
Carbon fibre rudder stock
Self aligning Jeffa bearings

Rig + Rigging - Supplied Exclusively by Southern Spars
Carbon fibre Mast
Two sets of swept back carbon spreaders
Split two piece mast with reuseable join for ease of road transport
Internal Hydraulic Mast Jack easily adjustable when sailing
Optional Easily adjustable mast step with screw for prebend tuning & hinging mast base to allow rig to be lowered aft
Main halyard lock
Jib halyard (Vectran) with XTR rope clutch
1 x Mast head spinnaker halyard
Optional 2nd Mast head spinnaker halyard with XTR rope clutch (removable for O.D.)
1 x Fractional halyard
Optional bullet lock for fractional halyard (removable for O.D)
Optional genoa staysail halyard with XTR rope clutch (removable for O.D.)
Adjustable Forestay with lashing
Carbon Fibre Boom includes 2 reef lines with in built XTR rope clutches and outhaul purchase
Hinging mast base for easy stepping and lowering of mast. (Mast hinges aft through
Optional 1706 Tuff Luff for headstay
Optional Variable thickness shim stack for hydraulically adjustable mast step (light medium heavy)
Optional mast lowering poles and car assembly

Owner supplied inventory, but talk to Ancasta for full specs and discounted rates.

Harken Deck Gear Package
2 x Primary Winches - Harken 40.2 PTP (Plain Top Performas)
2 x Runner Winches - Harken 35.2 STP (Self Tailing Performas)
4 x Harken winch handles
Carbon fibre air foil stanchions, pushpits and pulpits
Stainless Steel 1/19 wire lifelines
Fixed bow pole easily removable from socket in bow
4 x Spinlock XTR rope clutches in pit (jib, frac, MH, tackline)
Running Rigging Supplied by Sydney Rigging Specialists & Southern Spars:
2 x Jib sheets
2 x Spinnaker sheets (lead under deck to trimmer)
1 x Tack line lead to stb side of pit (1:1 and 2:1 options as standard
2 x Running backstay tails
Jib In/Out purchase lead to jib trimmer on both pt & stb side
Jib Up/Down purchase lead to jib trimmer on both pt & stb side
Jib Cunningham purchase lead to jib trimmer on stb side
Spinnaker Take down line lead to cockpit aft
Mainsheet coarse tune on swivel cleat in cockpit
Mainsheet fine tune purchase lead to main trimmer
Traveller purchase lead to main trimmer
Main Cunningham purchase lead aft to main trimmer
Main Outhaul purchase lead aft to main trimmer
Vang purchase lead aft behind traveller
Carbon fibre tiller with spinlock tiller extension
Carbon fiber helmsman and main trimmer foot bars
4 x Inspection ports on cockpit sides for rope tails
McConaghy custom sliding forward hatch with pneumatic seal. Rounded edges of front hatch for smooth spinnaker hoists and drops. Hatch seal pump located in cockpit.