Advert expired!
BCU4384604
Lyons 70 - High Performance Cutter

High performance cruising cutter sloop from Applied Alloy Yachts in Australia, designed by David Lyons, Australia. Many upgrades and major refit right down to bare hull in 2004 by Marine Applications of Australia. Great looking ocean cruising yacht with good accommodation, and all fixtures and fitting you would need. New mast and rigging, new engine in 2007, sails replaced in 2009. Worth considering if you a want a large blue water cruising yacht with good turn of speed and attractive to look at. The yacht design was originally called Lyons 65 (not 62) however after the major refit and rebuild with creating a transom garage it was extend to 70 feet (21.34 m).

                                         1st in Class, 57th Sydney-Hobart Race

Accommodations

  • Forward double berth with shared head.
  • Starboard twin decked berth with shared head
  • Mid double berth with individual ensuite
  • Two rear doubles (2 singles) berth with shared ensuite.
  • Raised deck saloon table and seating 6-8
  • Pilot and navigation table
  • Bose Entertainment center & Flat TV
  • Cockpit dining with two extended tables
  • Dinghy garage

Rigging and Sails

  • Seldon aluminum section mast by All Yacht Spars Australia
    with three spreaders. Stainless steel riggings, Dynex runners and
    Compate 3l6 stays.
  • Halyards and running riggings and Dyneema racing ropes .
  • Boom : Hydraulic aluminum boom by Leisurefurl of N.Z. with manual override.
  • Spinnaker pole : Carbon fiber painted and refitted with adjustable stay to mast.
  • Bowsprit : Carbon fiber painted and refitted with manual control.
  • Staysails : Reconditioned Harken hydraulic furlers for fore and inner stay
  • Main : 94 sq.m In Boom fully battened Mainsail High performance cruising laminate Tri Radial Cut made by Rolly Tasker Sails (January 2009)
  • Headsail : 129 sq.m 150% Roller furling High performance cruising laminate made by Rolly Tasker Sails (January 2009)
  • Staysail : 29.9 sq.m Roller furling high performance cruising laminate made by Rolly Tasker Sails (January 2009)
  • Spinnaker : 2.2 oz Asymmetrical Spinnaker carbon fibre
  • Deck gear : 4 hydraulic Barient winches
    2 Harken manual winches
    1 Harken electrical furling jib
    1 Harken electrical furling staysail
    1 Harken Mast winch
  • Boom Vang : Hydraulic Seaway
  • Back Stay : Hydraulic Seaway
  • Bow Spirit : Carbon fiber
  • Lazy Jack : Carbon fiber

Engines

  • Engine : Twin Yanmar Model 4JH4 x SD-50T – 75 HP each with S-Drives (Installed January 2007)
  • Generator : New Mase 1 S12 – 15 KVA and remote control
  • Bow thruster : Reconditioned Volvo bow thruster
  • Water maker : New Spectra Newport
    400 with second MPC, 3000 control display, 150 liters per hour
  • Hydraulics : Reconditioned and upgraded on existing system.
  • Added two units, Air-conditioning
  • Reversible Climma A-C system
  • Winches : 2 Barient Hydraulic Winches ( for main traveler sheets and boom
    furling)
    2 Barient Manual Running Rigging Winches
    2 Hutton Arco genoa winches

Galley and Equipment

  • Stove : Broadwater Brigantine 4 burners plus Microwave
  • Refrigerator & freezer : Waco custom-made
  • Ballast : 9 tons
  • Fuel Capacity : Diesel (2 - 400 liters & 2 - 500 litres)
  • Water Capacity : 2 x 450 litres
  • Waste : 800 gallons Gray with waste treatment
  • Fridge capacity :
  • Generator : MASE iS12-15KVA
  • Watermaker : Spectra Newport 400
  • Bow-Thruster : Volvo
  • Tender : 3.1m Gemini Inflatable plus 15 H.P. Yamaha
  • Bilge Pumps : 6 x electric + 2 manual
  • Windlass : Muir electric windlass new anchor winch motor
  • Steering : 5 epoxy aluminum with cover. Improved and reconditioned.
  • Lifting Keel : Vickers hydraulic control system and centerboard
  • Batteries : New Five Lifeline GPL-8D, Deep cycle AGM, Batteries 12V 255 amp. hrs. Switch Panel : BEP 900 – AC 4D 16 and NC 36 NM
  • Inverter : Victron Phoenix Inverter/charger - Multiplus 12/3000/120-50 (Installed June 2011)
  • Transformer : Star Delta isolation transformer
  • Two high powered alternators
  • Waste System : 2 x 8 litres Auto-San waste system

Safety Equipment

 

  • SAFETY EQUIPMENT
    Liferaft,  2 x 6 pcs RFD life rafts
    EPIRB : 406 MH2 Distress Beacon
    Flares  and Fire Extinguishers : 1 – 2.5 kg. Chubb 1 – 0.9 kg. Quell, 2 – 0.5 kg.
  • Dinghy : Gemini 310 fibreglass bottom wiyh 15HP Yamaha engine
  • Flotation system : New Turtle PAC 19 bags x 11 cylinders

Owners Comments

Valtair is a pedigreed sailing yacht built in aluminium in 1996 in Melbourne, Australia.

Valtair was extensively refitted and refurbished in 2002 from the bare hull to new riggings and sails. It took nearly two years in Brisbane to re-commission Valtair. As much as four tons were added from her minimum weight ratio for pure racing to suit the present cruising needs of modern comfort such as generator, air conditioning system, watermaker, additional fuel and water tank, furling boom, music and video entertainment centre and a host of other creative comfort furniture and easy navigational equipment. Valtair has twin Yanmar 75 HP engines , retractable keel, sonar and bow thruster for maneuvering in a tight spot. All safety equipment are on board to meet the international sailing safety standards.

There are five double cabins on Valtair : two forward (front) for the crew, one at mid section and two at Aft (rear). The two Aft cabins shared a head (bathroom), the mid section has attached head, the rear two share in between head. Valtair can accommodate ten people, four for crew and six for guests and if the owner would be on board, she can take two couples as guest.
A large saloon come-dining at mid section offers panoramic view and similarly the cockpit can be used for lounging and outdoor dining under shade of the bimini.
With all the hydraulic and automatic equipment on board, Valtair can be sailed easily with minimum crew.

Disclaimer

Nicolle Associates offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

  • This vessel is VAT Not Paid.
  • As always photographs do not do justice viewing is highly recommended.
  • This boat is lying in Malaysia
  • © 2015 Nicolle Associates
Category:Sailing Boats
Manufacturer:Lyons 70
Model:High Performance Cutter
Mooring Country:Malaysia
Currency:USD
Year built:1996
Condition:Used
Sale:Trade
Sales status:Delete
LOA:21.34 m/70 ft
Length:21.34 m/70 ft
Width:5.12 m/17 ft
KW:150.0 hp
No. of cabins:4
No. of berths:7
WC & bathrooms:4
Registration details
we're sorry, this ad is no longer available.
Latest ads in the same category:
Blow up dinghy
SubcategorySailing BoatsYear built -
Length0 m/0 ftSail area -
good condition comes with 3. 3hp mercury 2 stroke engine, seat, blow up floor, oars and foot pump also rolls up ...
new 
£ 550
Beneteau - Oceanis 311
SubcategorySailing BoatsYear built1999
Length9.85 m/32 ftSail area -
Beneteau Oceanis 311 from 1999 - all in great shape. Owned locally for over 10 years with a program of ...
31new 
£ 39,950
Vat Included / Paid
Wayfarer - Wayfarer
SubcategorySailing BoatsYear built -
Length4.88 m/16 ftSail area -
Wayfarer. no 3730. All original sails. launch trailer.  Old but still nice to sail.
new 
£ 400
Anchor for sale
SubcategorySailing BoatsYear built -
Length0 m/0 ftSail area -
22kg galvanised plough anchor for sale
new 
£ 40
Cable Reel with built in rcd
SubcategorySailing BoatsYear built -
Length0 m/0 ftSail area -
here we have a camping type cable Reel with built in RCD protection which is ideal for providing shore power to a ...
2new 
£ 20
NCLA01
member since 26.08.2014