A very well founded offshore racer with an extensive sail wardrobe. She is now lying in Hamble, UK and has been re-commissioned after a spell off the water. A turn-key proposition with a huge inventory of hardware and inshore and offshore sails.
Updated electronics and two 2014 RORC victories under her belt, clearly outlining this boats potential and at a fraction of the new boat price, she really is an attractive prospect.
Located in Hamble, near Southampton, please contact us for viewing arrangements.Inventory
The galley is fitted with a Corian counter top, a cool box with refrigerator element and integrated drain box constructional and flush integrated with the forward galley top, a galley top with fiddles, five lightweight composite drawers, three overhead lockers with drop fronts, four drop fronts below the counter, an access panel inboard and below the sink to access the electric bilge pump and sink drain fittings, and a single stainless sink with fresh water and salt water activated by foot pumps in the sole in front of the sink.
The saloon and aft bunks are fitted with in total 10 pipe cloth berths with block and tackle purchase. Floorboards are removable lightweight composite sole boards (sea going secured) painted with grey GripTex anti-slip. White Beckson inspection ports are installed into the floorboards in areas where access to through hulls or valves are required. All lockers are fitted out with 'internal-flush' locks. Sufficient storage bags are fitted in the interior. A folding table with Corian top and wood fiddles is installed into the port side of the keel box.
The navigation station is fitted with a composite instrument panel, a chart table with lightweight fiddles, one watertight locker for the computer, one composite fixed seat with cushions and locker space, sea lights and desk lights.
Primary winches : 2 x Harken 55.3 TCR Halyard winch : 1 x Harken ST56.3 (starboard) on cabin top Halyard winch : 1 x Harken STE48.2 electric (port) on cabin top Mainsheet winch : 1 x Harken ST55.3 Traveller winches : 2 x Harken ST32 Runner winches : 2 x Harken ST65.2 Halyards cockpit : All halyards directed to cockpit Steering : Double Carbon wheel steering on carbon pedestals Loudspeakers radio: 2 x loudspeakers in white, waterproof Mast & Rigging Make : Hall Spars Rigging type : Custom moulded topmast with rule optimzed section shape Construction : Mast in MS-40 high modules carbon fiber AwlGripped white Spreaders : Double 17,5° aft swept spreaders Standing rigging: Hall Spars, carbon fibre (2008) Fore stay : Tuff Luff, carbon fibre Backstay : Carbon fibre Boomvang : Navtec, hydraulic Spinnaker pole : MS-40 high modulus carbon fiber AwlGripped white Deep boom with cored side walls standard modulus carbon AwlGripped white Windex : Yes Genoatracks : Harken Mainsail track : Harken Other : Harken German mainsheet system, 2 x grindersBridge
Performance Offshore racer
LOA: 17.15 m Beam: 4.56 LWL: 15.01 m
Draft: 2.5 - 3.7 Displacement: 11563 kgs Ballast: 5200 kgs
The construction uses a pre-preg Epoxy matrix, vacuum bagged for lightweight construction. The total structure is post-cured to specification of SPt. High density core is used in high loaded areas such as slamming, chain plates, bow, etc. Hull & deck The hull is a male molded, vacuum bagged hull. The hull construction is full carbon pre-preg fibre skins with either low density Nomex or balsa core.
A single point hoist system is integrated into the keel.
The keel is a vertical hydraulic lifting keel system. The keel is antimony lead bulb faired to high polished finish, bolted to a high tensile (Weldox or Dillimax-grade) steel keel fin. The keel foil is milled to the designer's sections. Machinery
Engine Model: Yanmar 4JH4E 56HP
Cockpit: Brookes & Gatehouse Hercules 2000 system 4 x B&G full function displays (FFD) 5 x B&G 20/20 displays on mast bracket Autopilot NKE Gyropilot at starboard steering pedestal 2 x Compass, each one on steering pedestal Chart table: TFT flatscreen navigation computer with keyboard Furuno 1823C radar interfaced to computer. (Radar dome on carbon pole) GPS MX420 Furuno NX300 navtex, digital weather receiver 3 x B&G full function displays ICOM IC-M602 VHF telephone Tank system monitor for fuel and water
Switch panel : 24V Start battery : 1x 12V/79Ah Service battery : 4 x 12V/105Ah Battery charger : Mastervolt charger/inverter Mass Combi 24/2000-60 unit Alternator : 12V Yanmar alternator / Balmar 24V alternator for Python Drive Shore power/cabel: Yes Bilge pump : Jabsco 24V electric pump (plus 2x Whale manual bilge pumps) Watermaker : Katadyn PowerSurvivor 40E Endurance Series 12V/24V Rig
MAST & RIGGING
Make : Hall Spars
Rigging type : Custom moulded topmast with rule optimzed section shape
Construction : Mast in MS-40 high modules carbon fiber AwlGripped white
Spreaders : Double 17,5° aft swept spreaders
Standing rigging : Hall Spars, carbon fibre (2008)
Fore stay : Tuff Luff, carbon fibre
Backstay : Carbon fibre
Boomvang : Navtec, hydraulic
Spinnaker pole : MS-40 high modulus carbon fiber AwlGripped white
Deep boom with cored side walls standard modulus carbon AwlGripped white
Windex : Yes
Genoatracks : Harken
Mainsail track : Harken
Harken German mainsheet system, 2 x grinders Accommodation
Mainsails: 1 x Carbon/kevlar 3DL type 860L offshore (2008)
1 x Kevlar panelled offshore (2007)
1 x Carbon/kevlar 3DL type 860L inshore (2006)
1 x Spectra fully battened delivery main (2005)
Headsails: 2 x Jib carbon/kevlar 3DL light medium 106% (2005 & 2007)
2 x Jib carbon kevlar 3DL medium heavy 106% (2005 & 2007)
1 x Jib #3 panelled kevlar 100% (2007)
2 x Jib #4 panelled kevlar 85% (2005 & 2008)
1 x Jib #5 panelled kevlar (2007)
1 x Jib top 3DL (2005)
1 x Genoa staysail 3DL (2007)
2 x Code Zero spectra scrim, on furler (2005 & 2007)
1 x Spinnaker staysail 1.7oz 109%, on furler (2005)
2 x Asymetric spinnaker A1, 0.5oz (2005 & 2007)
2 x Asymetric spinnaker A2, 0.7oz (2005 & 2007)
1 x Asymetric spinnaker A3, 0.75oz (2005)
1 x Asymetric spinnaker A4, 1.2oz (2005)
2 x Asymetric spinnaker A5, 1.5oz (2005 & 2007)
Sail area jib = 73,1m²
Sail area mainsail = 110,4m²
Sail area spinnaker = 306m²