£ 132,746
listed price: 157.096 €Vat Included / Paid

Dufour 36 Performance

This feature requires you to be logged on boatshop24

You can login to your account or create a new account.
Send this classified to a friend!
Fill in the form below

"Your name" must be filled.
"Your email" must be filled.
"friend name" must be filled.
"friend email" must be filled.
Please select the I'm not a robot box.
your name:
your email:
friend name:
friend email:
Category:Sailing Boats
Manufacturer:Dufour 36 Performance
Mooring Country:United Kingdom
Year built:2016
Sales status:available
LOA:10.97 m/36 ft
Length:10.97 m/36 ft
Width:3.35 m/11 ft
Category:fin keel
Engine manufacturer:volvo penta d1-30
No. of engines:1
Material hull:grp

Remarks :
Finance available and part exchange considered! 

Many extras available to accommodate your chosen spec, contact our sales office for a full price list!

01752 605 377 

Click here for the virtual tour! 

Accommodation :

Carpentry is real wood veneer in Moabi, solid Moabi (oak optional) 
Floors are Moabi laminate
Cupboards fitted with ventilation louvres
Doors fitted with twin-bolt anti-vibration catches, cabin doors can be blocked in the open position
Mattresses are in quilted, an allergic fabric
Saloon cushions and mattress fabrics fitted with removable covers
White painted head-liner.

Layout options:

two cabins one head 

Glazing and Lighting:
Hull x two portholes
Two fixed portholes
Six x deck hatches with roller blinds and mosquito mesh
Numerous spots and reading lights.
Courtesy light, low-level lighting around saloon furniture

Forward Cabin:
Large berth, approximately 210 x 200cm
Head room 6ft/1.83m
Storage lockers under berth
Shelving on hull side
2 wardrobes with shelving
Anti roll partition to divide cabin into two berths if required, stowed under berth when not in use

Saloon banquettess to port and starboard
Saloon table with two folding leaves for easier movement, removable
Stowage under seats and behind backrests
Bar built in to saloon table
Cubby-holes x four
Cubby-hole fiddle in wood
Roomy stowage in saloon table
Water tank under banquettes

Chart Table:
Hinged wooden seat to accommodate heel, with stowage
Leatherette cushion
Large L shaped corian chart table with tilt up desk on the stbd side of the companionway
Closed bookshelf with flap
Ceiling light plus map reading light
Storage column below the table with door. Wall pocket beside seat
Hinged console cubby holes, holding the instruments and electrical distribution panel

L-shaped galley on the port side of companionway
Working top in Corian synthetic resin with wooden fiddles
Stainless sink with twin bowls and Corian synthetic resin covers
Hot and cold pumped water with chrome-plated brass single-lever mixer tap
Two-burner cooker with oven on gimbals, with stainless rail
Dowels to retain crockery when heeling
Refrigerator access via the worktop

Two x closed cubby-holes
Below sink, with door
Portable cutlery tray
Crumb tray under floor
Waste bin below sink, sort compartments
Light and ventilation provided by an opening port and ceiling light over galley

Wide steps
Sliding companionway hatch and door in Plexiglas with stops and lock
Engine hatch under companionway steps
Stowage, wall pocket in companionway
Handrails x two solid wood

Aft Head:
Manual sea toilet
Wash-basin unit with basin and top in Corian synthetic resin
Chrome-plated brass single-lever mixer tap with shower head
Discharge direct, via an electric pump
Closed high-level cupboards
Large mirror
Shower grating, Corian
Ventilation via deck hatch 

Inventory :

Cockpit bench seats with non-slip surface
Helmsman’s seat with non-slip surface
Two x removable cockpit lockers
Helm x two steering wheels
Helm console x two, black, aluminium
Engine control and control panel.
Compass x two
Gas locker, sealed aft, to port
BIB locker in cockpit floor, aft
Tender locker in cockpit floor, aft
Shower with cold water
Foldaway stainless bathing ladder.
Cockpit floor in polyester, slightly concave, with solid wood toe-boards
Emergency tiller, head of rudder stock beneath helmsman’s floor for fitting the emergency tiller

Sail Locker:
Accessibility, door in aft head and through cockpit locker
Hanging rail

Deck Fittings:
Shroud and lower shroud chainplates on external hull
Safety harness chainplates in cockpit floor
Guard cleats x two
Mooring cleats x four
Rubbing plates x six on the hull sheerline
Fuel deck fillers x one
Water deck fillers x two
Mainsail sheet tracks on cockpit floor with car adjustment lines
Genoa tracks With piston cars
Two x genoa sheet return pulleys
Swan-neck is stainless, for electrical cables
Two x deck organizers for halyard returns
Two halyard winches on cabin roof
Two x genoa sheet winches on cockpit coamings
Two rows of jamcleats port / starboard level with the companionway
Furler line jamcleat at aft end of sidedeck
Polyester hatch cover forward of the companionway

Two x winch handles with bin
Owner’s pack with Owner’s Manual

Mechanical :

Hand-laminated in polyester/glassfibre; sides made from vacuum-bonded PVC foam core sandwich
Decorative grey bands on hull
NPG gelcoat with first mat impregnated with NPG resin, forming an optimum barrier against osmosis
Hull bottom counter-moulded, floors laminated into the hull.
The deck is sandwich with injected PVC foam core
Keel bolts bear on stainless back-plates
Semi-elliptical shaped rudder, filled with closed-cell epoxy foam
Rudder stock is solid stainless steel.
Steering, self-aligning roller bearings with ball-bearing sheaves
Non-slip structured deck surface.

Engine power 29hp (20.9 kW) Volvo Penta D1-30
Sail-drive transmission
Cooling system via heat exchanger, anti-siphon valve
Sea-water strainer
Fuel tank gauge on electrical distribution panel
Fuel filter with water separator
Emergency fuel shut-off valve
Control panel close to helmsman, with hours meter and tachometer
Alternator with battery isolator
Ventilation with two natural inlets and electric mechanical extract
Independent engine bilge
Access to the engine from front and both sides.
Two-blade, fixed pitch propellor
Carefully-designed foam acoustic and thermal insulation

Circuit IS 12 V
Distribution panel with 15 functions with circuit-breakers, voltmeter
12 V socket in galley and at electrical distribution panel
Isolator x one per battery set in aft port cabin
75ah engine battery
76ah house battery

Water System:
Tanks x two polyethylene water tanks with inspection holes
Electric bilge pump with strainer, controlled from electrical distribution panel
Manual bilge pump operated from cockpit.
Bilge sump built into keel
Water-heater via heat-exchanger
Hot water tank  with pressurized water pump unit
Shower water discharged by pump direct to the sea

Anodized aluminium mast with two levels of swept spreaders
In 9/10 rig
Mast stepping: On keel
Lights: 3-colour masthead lights + anchor light + 2-colour masthead light
Anodized aluminium boom fitted with 2 rapid reefers
Discontinuous standing rigging in stainless single-strand cable, chrome-plated bronze rigging screws
Aluminium gooseneck, with synthetic gasket and halyard return pulleys
Backstay adjusts using bridle
Running rigging in pre-stretched textile including main and genoa halyards in ‘low-stretch&rsq uo; quality, boom topping lift, main and genoa sheets, main sheet car and downhaul adjusters, reef lines and furling line

I : 14.20 m
J : 4.05 m
P : 14 m
E : 4.90 m
LP : 4.34 m

Full batten main
110% Genoa
Sail area : 70.6 m²
Mainsail : 40.6 m²
Genoa : 30 m²

Waterline length33 feet
Network Yacht Brokers Plymouth
Network Yacht Brokers Plymouth