Custom Built - Sea King - Project Yacht
"Brent Goose" is a bilge keel Bermudan Cutter by Sea King in 1971 from Iroko on Oak with a lead ballast keel of about 3/4 tons, Iroko clinker planking 5/8" thick and solid Iroko planked decks Trakmark covered. She has varnished deck beams and deckhead (Iroko).
After the pre-purchase survey a new stem was fitted professionally and the stern post area where it had shrunk back was epoxy filled at the same time and is now very sound. Some keel bolts were also renewed.
All interior joinery was removed and the hull completely stripped back to bare wood inside and out and applying a new paint system. New joinery in the saloon using Brown Oak and Douglas Fir is now almost complete giving two good size settee berths with sideboards and trotter boxes, and a good galley area - the cabin sole is solid Douglas Fir planking.
The cockpit has new floor and engine bearers fitted, but the forepeak has not been started (though the hull sides and bilge have been fully primed ready for topcoats).
Currently, settee berths either side of main cabin
Room for 2 V-berths in forecabin with central heads
The Mast has delaminated so will need renewing, but the original available as a pattern
Some sails - condition probably tired.
Pulpit, pushpit, guard rail stanchions (all galvanised)
Anchor and chain
Rudder - original hangings too corroded for use but available as patterns
Engine and Mechanics
Used Beta 20hp BD722 diesel
with new shaft and propellor fitted
New 65 litre fuel tank - not yet fitted
There may also be some other bits and pieces!
|Subcategory:||Classic Sailing Boats|
|Model:Sea King - Project Yacht|
|Mooring Country:||United Kingdom|
|LOA:||7.47 m/25 ft|
|Length:||7.47 m/25 ft|
|Width:||2.89 m/9 ft|
|Draft:||0.61 m/2 ft|
|Engine manufacturer:Beta Marine|
|No. of cabins:||2|
|Boat Ref:||Brent Goose|
we're sorry, this ad is no longer available.